Window Mode of ImageIR® – Up to 105,000 Hz

The ImageIR® can be operated in full, half, quarter and sub mode. With the camera control software, it is possible to use the extended subwindowing function. Using click-and-drag, freely definable sections can be set up quickly and conveniently. Subwindow image fre¬quencies of up to 105,000 Hz can thus be achieved.

Overview of Benefits of High-Speed-Thermoagraphy with ImageIR®

  • High-speed measurement up to 105,000 Hz
  • Snapshot detectors and complementary components provide for highest measurement speed
  • Fully radiometric real-time sequences with up to 16 bit data depth
  • Capture of extremely rapid temperature and motion sequences
  • High-speed capture of radiometric thermal images on Notebook/PC via 10 GigE interface
  • InfraTec thermography - High-speed Mode
    Further information about High-speed Mode

    High-speed Mode – Increase Frame Rate and Sensitivity

    Due to the binning technology, infrared cameras have two speed modes – the standard mode and the high-speed mode, in which the frame rate increases more than three times. The field of view remains constant in both modes, so the scene captured by the camera does not change. In high-speed mode, the thermal resolution also increases by a factor of two.

  • Thermografie-Kameraserie ImageIR® mit neuer 10 GigE-Schnittstelle
    Further information about the 10 GigE technology

    10 GigE Interface for a Strong Increase in Output

    The 10 Gigabit Ethernet interface of the high-end camera series ImageIR® opens this extremely fast transmission standard with a NIC specially developed by InfraTec. This works with optical or electrical transceiver modules that are easy to change and are called SFP+.

    Different 10 GigE fiber SFP+ transceivers allow transmission ranges of up to ten kilometers with the same low sensitivity to electromagnetic interference. A corresponding standard SFP ensures backward compatibility with the conventional GigE interface. This combination allows the ease of use of the cameras with the 10 Gigabit Ethernet interface in existing systems - though at a reduced transmission rate.

High-speed Measurement with VarioCAM® High Definition

The infrared camera VarioCAM® High Definition enables the usage of the sub-frame mode (sub-windowing) for rapid temperature changes. This means thermographic sequences with refresh rates of up to 240 Hz can be created with the camera series VarioCAM® HD. A defined sub-frame of the detector is picked out to achieve these extremely high refresh rates.

Besides the storage of thermographic sequences via GigE interface with the thermography software IRBIS® 3 online, there is the option to save fully radiometric sequences with 16 bit data depth directly in the camera memory, to analyse there or transmit to the software IRBIS® 3. No measurement information is lost with high-speed online measurement. Data can be analysed in detail and subsequently processes.

Overview of Benefits of High-Speed Measurement with with VarioCAM® High Definition

  • High-speed measurement up to 240 Hz
  • Fully radiometric real-time sequences with 16 bit data depth
  • Capture of extremely rapid temperature and motion sequences
  • High-speed capture of radiometric thermal images on Notebook/PC via GigE interface

Subwindowing in High-Speed Processes