Infrared camera
ImageIR ® 5300 Series

The fast stationary infrared camera for precise and spectral thermography

  • Calibration of various calibration curves for most precise temperature measurement
  • Motorized controllable filter wheel for spectral thermography with up to four special filters included
  • Snap-shot detector for precise image acquisition at frame rate of up to 12 kHz
  • High repeatability due to reliable thermal decoupling of lens and electronics module

Details about infrared camera


Spectral range

(2.0 ... 5.7) µm

linie

Pitch

30 µm

linie

Detector

MCT or InSb

linie

Detector format (IR pixels)

(320 x 256)

linie

Image acquisition

Snapshot

linie

Readout mode

ITR

linie

Aperture ratio

f/3.0 or f/2.0

linie

Detector cooling

Stirling cooler

linie

Temperature measuring range

(-40 ... 1,500) °C (up to 3,000 °C)*

linie

Measurement accuracy

± 1 °C or ± 1 %

linie

Temperature resolution @ 30 °C

Better than 0,015 K (15 mK)

linie

Frame rate
(full/half/quarter/sub frame)

Up to 450/1,500/4,500/25,000 Hz

linie

Window mode

Yes

linie

Focus

Manually, motorised or automatically*

linie

Dynamic range

Up to 16 bit

linie

Integration time

(1 ... 20,000) µs

linie

Rotating filter wheel*

Up to 5 positions

linie

Rotating aperture wheel*

Up to 5 positions

linie

Multi integration time

Yes

linie

Interfaces

GigE, CAMLink*, HDMI*

linie

Trigger

3 IN / 2 OUT, TTL

linie

Analogue signals*, IRIG-B*

1 IN, no

linie

Tripod adapter

1/4" and 3/8" photo thread, 2 x M5

linie

Power supply

24 V DC, wide-range power supply (100 ... 240) V AC

linie

Storage temperature

(-40 ... 70) °C

linie

Operation temperature

(-20 ... 50) °C

linie

Protection degree

IP54, IEC 60529

linie

Impact strength/vibration resistance in operation

2 G, IEC 68-2-29/26

linie

Dimensions

(244 x 120 x 160) mm

linie

Weight

3.3 kg (without lens)

linie

 

*Depending on model

Detect smallest temperature differences using high thermal resolution of 20 mK

The thermal resolution of the ImageIR ® 5300 series allows you to measure smallest temperature differences of only 20 mK (0.02 °C) (at 30 °C). Thermal images with a narrow temperature span display details absolutely sharp. You will find interesting signatures even there where other infrared camera systems cannot detect any temperature differences any longer.

Acquire thermal images in a millisecond time

The exact and fast control of the detectors of the ImageIR ® 5300 infrared camera series provides the possibility to acquire and analyse thermal images at a time scale of milliseconds. Thereby it allows an easy analysis of fast processes regarding their thermal changes. Thermal images can be stored at a frame rate of up to 12 kHz and provide insights into thermal changes of fast running processes.

Extend your temperature measurement range with an automatic aperture setting

The temperature measurement range of the ImageIR ® 5300 series can be widened by an integrated aperture wheel. The motorized aperture wheel can be controlled by the camera control itself. Working with calibrated measurement ranges the appropriate aperture will even be set automatically in the infrared camera. When filter and aperture wheels are separately integrated ImageIR ® 5300 camera series will be especially flexible in handling specific measurement situations.

Highest homogeneity will provide you with a brilliant picture

A infrared camera out of the ImageIR ® 5300 series offers highest homogeneity by combining cooled detector technology of the latest generation with other high precision components. Precise measurements therefore will not be influenced by any fixed pattern and thermal images will be absolutely clear.

Make use of spectral filters for material specific measurements

Material specific emissivity and transmissivity properties have to be taken into account while measuring with infrared camera systems. The integration of spectral filters makes use of those specifics for special measurements. For example, spectral ranges of thin PE foils can be excluded where they are highly transmissive – to say transparent. Like this only the radiation will be measured which is purely emitted by the foil itself. Based on its long experience in thermography InfraTec can support you in selecting the right spectral filter. The infrared camera systems of the ImageIR ® 5300 series can integrate a remotely controllable filter wheel which can hold up to four spectral filters. The filter position close to the detector can avoid warm aperture effects and allows for the usage of smaller and thereby cheaper filters in the infrared camera.

Measure correctly with an accuracy of +/- 1%

If your measurement object has a temperature of 18.7°C you will always measure 18.7°C and exactly this is taken care of by the infrared camera systems of the ImageIR ® 5300 series. You can rely on a correct thermographic measurement with an accuracy of +/- 1%

Easily transfer your radiometric data to the computer

You will be able to work with both radiation proportional data formats and also directly with temperature data in °C or °F. You will receive the data by setting your specific parameters in the easy handling acquisition interface of the  ImageIR ® 5300 series at a frame rate of up to 12 kHz. 

Increase your flexibility by using the modular design concept

The ImageIR ® 5300 infrared camera series is based on a modular concept and allows for successive upgrading and changes of powerful components like motorized lenses or a high-speed shutter. Already in its basic configuration this model of infrared camera can be delivered with different detectors which support your application the best way. Like this you will always remain flexible and optimally adapt your infrared camera systems to your respective needs.

Control your infrared camera or your processes

You can include a trigger interface in your infrared camera of the ImageIR ® 5300 series which allows to clock external processes or devices with the frequency of the camera or vice versa. Thereby a synchronous operation is guaranteed, e.g. of various measurement devices. As the infrared camera systems of the ImageIR ® 5300 series come with a snapshot detector it is also possible to trigger the acquisition of thermal images by an external clock. Both trigger directions are optimally supported by the products of the thermographic software family
IRBIS ® 3 
which also takes care of an easy handling of the settings.

The following infrared camera models might also be of interest to you:

ImageIR ® 10300 Series
ImageIR ® 9300 Series
ImageIR ® 8300/9300 Z Series
ImageIR ® 8800 Series
ImageIR ® 8300 Series
ImageIR ® 8300 hp Series
ImageIR ® 7300 Series
ImageIR ® 4300 Series

Applications areas for infrared camera

  • Spectral thermography
    Spectral thermography

    Using precision filters for specific applications you will measure exactly those spectral ranges being of interest to you.

  • High-Speed Thermography
    High-speed thermography

    Get even faster and analyze temperatures at highest process speeds.

  • Material testing
    Material testing

    Save time and costs by nondestructively testing components with infrared camera systems by InfraTec.

  • Thermal optimization
    Thermal optimization

    Identify possible problems already in the development phase well before serial production.

  • Electronics and electrical engineering
    Electronics and electrical engineering

    Measure temperature distributions of smallest electronic components with infrared camera systems.

  • Thermography in automotive industry
    Automotive industry

    Infrared camera systems help you to secure a high product quality in production and at your suppliers.

  • Thermography in aerospace industry
    Aerospace industry

    Comply with highest security demands by applying state-of-the-art infrared camera systems.

  • Thermography in glass industry
    Glass industry

    Measure correctly temperature distributions behind and on glass by using selected spectral filters.

  • Thermography in plastics industry
    Plastics industry

    Cost-efficiently control die-casting and extrusion processes by means of infrared camera systems.

  • Thermographic Automation PV-LIT solar cell
    Test system PV-LIT

    Get advantages in costing and quality by non-contact thermographic testing of your solar cells and PV-modules.

  • Thermography in chemical industry
    Chemical industry

    Systematically control reactive process heat and display with infrared camera systems of InfraTec.

  • Thermography in the metallurgy
    Metallurgy

    Efficiently reduce the energy consumption of your metallurgic processes using infrared camera systems.

  • Thermographic Automation PV-LIT solar cell
    Test system PV-LIT

    Get advantages in costing and quality by non-contact thermographic testing of your solar cells and PV-modules.

  • Thermographic Automation Stationary Industrial Solutions
    Stationary industrial solutions

    Gain competitive edge by bespoke and innovative automation solution with high quality and industrial proof thermal images and components.

  • Thermographic Automation Brake test bench
    Brake test bench

    Check for long-life fatigue strength of mechanical components in load tests, using high-end infrared cameras.

  • Aerial Thermography
    Aerial Thermography

    Detec persons and objects in the field or monitor wide-area geologic properties or environmental damages.

  • Active Thermography
    Active thermography

    Make use of active thermography for non-destructive and contact-free material testing, for both automated inline and offline solutions.

  • Thermography in human medicine
    Human medicine

    Being non-contact and non-invasive thermography is a widely accepted diagostic method.

  • Thermography in veterinary medicine
    Veterinary medicine

    Using thermography quickly make accurate diagnosis in a wide field of illnesses.

  • Micro-Thermography
    Micro-Thermography

    Micro-thermography allows for the thermal analysis of extremely small structures in the micrometer range, providing a detailed representation of the temperature distribution on complex electronic assemblies and components.

Case study


Test of laser welds with ImageIR® from InfraTec

Test of Laser Welds

Non-destructive testing methods are becoming increasingly more important in the industry. One reason is that they cost much less than other test methods. As a very elegant method, the active heat flow thermography method is now firmly established as a powerful method of non-contact and non-destructive testing of products of different manufacturing technologies.

Usage of ImageIR ® to test laser welds of body components