Infrared camera
ImageIR ® 4300 Series

The entry door to spectral thermography

  • Motorized remotly controlled filter wheel for spectral thermography includable
  • Seperatable filter and aperture wheels can allow for highest flexibility
  • High thermal resolution for precision measurements
  • Modular design for application specific configuration and successive adaption to increasing needs

Details about infrared camera


Spectral range

(2.0 ... 5.7) µm

linie

Pitch

30 µm

linie

Detector

MCT or InSb

linie

Detector format (IR pixels)

(320 x 256)

linie

Image acquisition

Snapshot

linie

Readout mode

ITR

linie

Aperture ratio

f/3.0 or f/2.0

linie

Detector cooling

Stirling cooler

linie

Temperature measuring range

(-40 ... 300) °C

linie

Measurement accuracy

± 2 °C or ± 2 %

linie

Temperature resolution @ 30 °C

Better than 0,02 K (20 mK)

linie

Frame rate
(full/half/quarter frame)*

Up to 75/265/530 Hz

linie

Window mode

Yes*, half frame/quarter frame

linie

Focus

Manually

linie

Dynamic range

14 bit

linie

Integration time

(1 ... 20,000) µs

linie

Interfaces

GigE, HDMI*

linie

Trigger

1 IN / 1 OUT, TTL

linie

Tripod adapter

1/4" and 3/8" photo thread, 2 x M5

linie

Power supply

24 V DC, wide-range power supply (100 ... 240) V AC

linie

Storage temperature

(-40 ... 70) °C

linie

Operation temperature

(-20 ... 50) °C

linie

Protection degree

IP54, IEC 60529

linie

Impact strength/vibration resistance in operation

2 G, IEC 68-2-29/26

linie

Dimensions

(244 x 120 x 160) mm

linie

Weight

3.3 kg (without lens)

linie

 

*Depending on model

Measure precisely over a long time

A high long-term stability of the thermographic measurement with infrared camera systems of the ImageIR ® 4300  series is achieved by an excellent thermal decoupling of the electronics module which will emit heat during its operation from the optical and detector module being most important for the signal receipt.

Make use of spectral filters for material specific measurements

Material specific emissivity and transmissivity properties have to be taken into account while measuring with infrared camera systems. The integration of spectral filters makes use of those specifics for special measurements. For example, spectral ranges of thin PE foils can be excluded in case they are highly transmissive – to say transparent. Like this only the radiation will be measured which is purely emitted by the foil itself. Based on its long experience in thermography InfraTec can support you in selecting the right spectral filter. The infrared camera systems of the ImageIR ® 4300 series can integrate a remotely controllable filter wheel which can hold up to four spectral filters. The filter position close to the detector can avoid warm aperture effects and allows for the usage of smaller and thereby cheaper filters in the infrared camera.

Extend your temperature measurement range with an automatic aperture setting

The temperature measurement range of the ImageIR ® 4300 series can be widened by an integrated aperture wheel. The motorized aperture wheel can be controlled by the camera control itself. Working with calibrated measurement ranges the appropriate aperture will even be set automatically in the infrared camera. When filter and aperture wheels are separately integrated ImageIR ® 4300 will become especially flexible in handling specific thermographic measurement situations.

Easily transfer radiometric data to our computer

You can work with radiometric data both in radiation proportional format as well as directly in temperature data in °C or K. The data can easily be acquired with the handy and customizable data interface of the ImageIR ® 4300 camera series.

Focus the thermal radiation loss-free with quality lenses

In the field of thermography, low temperatures result in lower infrared radiation and thereby in smaller signal for the infrared camera. That is why all the available signal should be used. The lens is the part of the infrared camera getting in touch with the infrared radiation at first and therefore it plays an important role. Precision lenses being coated with an anti-reflection film for avoiding disturbtions take care that the whole infrared radiation will be focussed to the detector of the of the ImageIR ® 4300 series. Within this series of infrared camera systems, a wide range of lenses - starting with telephoto lenses up to microscopic lenses – can be found, too.

The high thermal resolution of 20 mK lets you detect smallest temperature differences

The thermal resolution of the ImageIR ® 4300 series allows you to measure smallest temperature differences of only 20 mK. Thermal images with a narrow temperature span display details absolutely sharp. You will find interesting signatures even there where other infrared camera systems cannot detect any temperature differences any longer.

Increase your flexibility by using the modular design concept

The ImageIR ® 4300 series is based on a modular concept and allows for successive upgrading and changes of powerful components like motorized lenses or a high-speed shutter. Already in its basic configuration it can be delivered with different detectors which support your application the best way. Like this you will always remain flexible and optimally adapt your infrared camera systems to your respective needs.

The following infrared camera models might also be of interest to you:

ImageIR ® 10300 Series
ImageIR ® 9300 Series
ImageIR ® 8300/9300 Z Series 
ImageIR ® 8800 Series
ImageIR ® 8300 Series
ImageIR ® 8300 hp Series
ImageIR ® 7300 Series
ImageIR ® 5300 Series

Application areas

  • Material testing
    Material testing

    Save time and costs by nondestructively testing components with infrared camera systems by InfraTec.

  • Thermal optimization
    Thermal optimization

    Identify possible problems already in the development phase well before serial production.

  • Electronics and electrical engineering
    Electronics and electrical engineering

    Measure temperature distributions of smallest electronic components with infrared camera systems.

  • Thermography in automotive industry
    Automotive industry

    Infrared camera systems help you to secure a high product quality in production and at your suppliers.

  • Thermography in aerospace industry
    Aerospace industry

    Comply with highest security demands by applying state-of-the-art infrared camera systems.

  • Thermography in glass industry
    Glass industry

    Measure correctly temperature distributions behind and on glass by using selected spectral filters.

  • Thermography in plastics industry
    Plastics industry

    Cost-efficiently control die-casting and extrusion processes by means of infrared camera systems.

  • Thermography in chemical industry
    Chemical industry

    Systematically control reactive process heat and display with infrared camera systems of InfraTec.

  • Thermography in the metallurgy
    Metallurgy

    Efficiently reduce the energy consumption of your metallurgic processes using infrared camera systems.

  • Thermographic Automation Stationary Industrial Solutions
    Stationary industrial solutions

    Gain competitive edge by bespoke and innovative automation solution with high quality and industrial proof thermal images and components.

  • Active Thermography
    Active thermography

    Make use of active thermography for non-destructive and contact-free material testing, for both automated inline and offline solutions.

  • Thermography in human medicine
    Human medicine

    Being non-contact and non-invasive thermography is a widely accepted diagostic method.

  • Thermography in veterinary medicine
    Veterinary medicine

    Using thermography quickly make accurate diagnosis in a wide field of illnesses.

  • Micro-Thermography
    Micro-Thermography

    Micro-thermography allows for the thermal analysis of extremely small structures in the micrometer range, providing a detailed representation of the temperature distribution on complex electronic assemblies and components.